CLTLT Series Lift & Tilt Tables
- Base and platform leg rollers are captured within the channel frame for maximum stability
- Internally-mounted 3⁄4HP, 115/230V, 1PH, 60Hz, or 208/230/460V, 3PH, 60 Hz intermittent duty TENV super torque motor.
- 24 V operating control voltage
- Pushbutton Pendant control
- 12 in. high lip on pivot end
- Double-acting hydraulic cylinders
- Surfaces degreased, oxide primed and finished with two coats of enamel
- Lifetime self-lubricating, antifriction bearings at all pivot points
Have a question or comment?
Heavy-duty electrohydraulic tables with capacities of 2,000 to 6,000 lbs., angle of tilt to 45 degrees with platform sizes of 24 x 48 to 48 x 60 in. The CLTLT lifts and tilts within its own base frame, so they require minimal floor space to operate. NOTE: These units tilt as the platform is raised. They do not allow independent control of Lift and/or Tilt. If that is required click here. |
-
Model
NumberCapacity Standard
PlatformMax
PlatformBase
FrameLow
HeightLifting
Speed (sec)Motor
HPShip
WeightCLTLT-02-45 2000 24 x 48 36 x 48 22.5 x 47 10 15 0.75 675 CLTLT-04-45 4000 24 x 48 36 x 48 22.5 x 47 10 22 0.75 725 CLTLT-06-45 6000 24 x 48 36 x 48 22.5 x 47 10 32 0.75 800